Intel® Server Board M50CYP2SB Family Technical Product Specification
154
Feature
Details
Riser Card Support
Concurrent support for up to four riser cards, including one PCIe Interposer riser card with support for
up to three PCIe* add-in cards. In the below description HL = Half Length, LP = Low Profile.
Riser Slot #1:
•
Riser Slot #1 supports x16 PCIe* lanes routed from CPU 0
•
PCIe* 4.0 support for up to 32 GB/s
Riser Slot #1 supports the following Intel Riser Card option:
•
One PCIe* slot riser card supporting (one)
–
LP/HL, single-width slot (x16 electrical, x16 mechanical)
iPC
–
CYP1URISER1STD
Riser Slot #2:
•
Riser Slot #2 supports x24 PCIe* lanes routed from CPU 1
•
PCIe* 4.0 support for up to 32 GB/s
Riser Slot #2 supports the following Intel Riser Card options:
•
One PCIe* slot riser card supporting (one)
–
LP/HL, single-width slot (x16 electrical, x16 mechanical)
iPC
–
CYP1URISER2STD
•
NVMe* riser card supporting (one)
–
LP/HL, single-width slot (x16 electrical, x16 mechanical) + (one) -
x8 PCIe* NVMe* SlimSAS* connector with re-timer. Included in iPC
–
CYP1URISER2KIT
PCIe* Interposer Riser Slot (requires PCIe* riser card in Riser Slot #2)
•
PCIe* Interposer Riser Slot supports the PCIe* interposer riser card as an accessory option. This card
supports one PCIe* add-in card (x8 electrical, x8 mechanical). The PCIe* interposer riser card can be
used only when it is connected to the PCIe* NVMe* riser card in Riser Slot #2. The interposer card uses
x8 PCIe* data lanes routed from the PCIe* SlimSAS* connector on the PCIe* riser card. The Intel
accessory kit includes the PCIe* interposer riser card, PCIe* riser card, and PCIe* interposer cable. iPC
–
CYP1URISER2KIT
Riser Slot #3:
•
Riser Slot #3 supports x16 PCIe* lanes routed from CPU 1
•
PCIe* 4.0 support for up to 32 GB/s
Riser Slot #3 supports the following Intel Riser Card option:
•
NVMe* riser card supporting (two)
–
PCIe* NVMe* SlimSAS* connectors iPC
–
CYPRISER3RTM
Note:
Riser Slot #3 does not support add-In cards
PCIe* NVMe* Support
•
Support for up to 10 PCIe* NVMe* Interconnects
o
Eight server board SlimSAS* connectors, four per processor
o
Two M.2 NVMe/SATA connectors
•
Additional NVMe* support through select Riser Card options
•
Intel® Volume Management Device 2.0 (Intel® VMD 2.0) support
•
Intel® Virtual RAID on CPU 7.5 (Intel® VROC 7.5) support using one of the three types of VROC keys
(available as an Intel accessory option)
Video Support
•
Integrated 2D video controller
•
128 MB of DDR4 video memory
•
One VGA DB-15 external connector in the back
Server Board SATA
Support
•
10 x SATA III ports (6 Gb/s, 3 Gb/s and 1.5 Gb/s transfer rates supported)
o
Two M.2 connectors
–
SATA / PCIe*
o
Two 4-port Mini-SAS HD (SFF-8643) connectors
USB Support
•
Three USB 3.0 connectors on the back panel
•
One USB 3.0 and one USB 2.0 connector on the front panel
•
One USB 2.0 internal Type-A connector
Serial Support
•
One external RJ-45 Serial Port A connector on the back panel
•
One internal DH-10 Serial Port B header for optional front or rear serial port support. The port follows
the DTK pinout specifications.
Front Drive Bay
Options
•
4 x 2.5
” SAS/SATA/NVMe* hot swap drive bays
•
12 x 2.5
” SAS/SATA/NVMe* hot swap drive bays