Intel I7-900 DEKSTOP SPECIFICATION Datasheet Download

Page: 88 / 98

Register Description

Datasheet

2.12

Integrated Memory Controller Channel Rank

Registers

2.12.1

MC_RIR_LIMIT_CH0_0, MC_RIR_LIMIT_CH0_1

MC_RIR_LIMIT_CH0_2, MC_RIR_LIMIT_CH0_3

MC_RIR_LIMIT_CH0_4, MC_RIR_LIMIT_CH0_5

MC_RIR_LIMIT_CH0_6, MC_RIR_LIMIT_CH0_7

MC_RIR_LIMIT_CH1_0, MC_RIR_LIMIT_CH1_1

MC_RIR_LIMIT_CH1_2, MC_RIR_LIMIT_CH1_3

MC_RIR_LIMIT_CH1_4, MC_RIR_LIMIT_CH1_5

MC_RIR_LIMIT_CH1_6, MC_RIR_LIMIT_CH1_7

MC_RIR_LIMIT_CH2_0, MC_RIR_LIMIT_CH2_1

MC_RIR_LIMIT_CH2_2, MC_RIR_LIMIT_CH2_3

MC_RIR_LIMIT_CH2_4, MC_RIR_LIMIT_CH2_5

MC_RIR_LIMIT_CH2_6, MC_RIR_LIMIT_CH2_7

Channel Rank Limit Range Registers.

Device:

Function: 2

Offset:

40h, 44h, 48h, 4Ch, 50h, 54h, 58h, 5Ch

Access as a Dword

Bit

Type

Reset

Value

Description

9:0

LIMIT.
This field specifies the top of the range being mapped to the ranks specified in

the MC_RIR_WAY_CH registers. The most significant bits of the lowest address

in this range is one greater than the limit field in the RIR register with the next

lower index. This field is compared against MA[37:28].

Summary of Contents for I7-900 DEKSTOP SPECIFICATION



































































































Search results

Summary of Contents for I7-900 DEKSTOP SPECIFICATION

Reviews:

Related manuals for I7-900 DEKSTOP SPECIFICATION

Brands by name

Popular brands

Intel I7-900 DEKSTOP SPECIFICATION, Datasheet

Search results

Summary of Contents for I7-900 DEKSTOP SPECIFICATION

Reviews:

Related manuals for I7-900 DEKSTOP SPECIFICATION

Brands by name

Popular brands