Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
26
Figure 54.
Installing the M.2 Device
4.
Install the IOM riser and carrier assembly to the server board. For instructions, see
5.
Remove the M.2 SATA cable from its package.
6.
Insert one end of the cable into the connector on the IOM riser and carrier assembly (see letter
C
) and
the other end into the connector on the server board (see letter
D
).
7.
Push down the cable as required (see letter
E
) and make sure that the connectors are not stressed.
Figure 55.
Connecting the M.2 SATA Cable
2.10
Installing and Removing the Intel® Remote Management
Module 4 Lite (RMM4 Lite)
2.10.1
Installing the Intel® RMM4 Lite
1.
Remove the Intel® RMM4 Lite from its package.
2.
Locate the RMM4 Lite connector on the server board next to the riser slot 2.
3.
Place the Intel® RMM4 Lite over the connector and match the orientation of the Intel® RMM4 Lite to that
of the connector.
4.
Press the Intel® RMM4 Lite down onto the connector.
