Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
16
2.5
Installing and Removing the Memory
2.5.1
Installing the Memory
1.
Locate the DIMM socket. Make sure the clips at either end of the DIMM socket are pushed outward to the
open position (see letter
A
).
2.
Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM above the
socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket (see letter
B
).
3.
Insert the bottom edge of the DIMM into the socket (see letter
C
). When the DIMM is inserted, push down
on the top edge of the DIMM until the retaining clips snap into place (see letter
D
). Make sure the clips
are firmly in place (see letter
E
).
Figure 23.
Installing the Memory
2.5.2
Removing the Memory
1.
Locate the DIMM socket. Gently spread the retaining clips at either end of the socket. The DIMM lifts from
the socket.
2.
Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
2.6
Installing and Removing a PCIe* Add-in Card
2.6.1
Installing a PCIe* Add-in Card
1.
Loosen the two screws (see letter
A
).
Figure 24.
Removing the PCIe* Riser Assembly – Step 1
2.
Pull out the PCIe* riser assembly (see letter
B
).
