Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
14
Figure 18.
Installing the Processor – Install the Processor
4.
Remove the Socket Cover. Remove the socket cover from the load plate by pressing it out.
Note:
The socket cover should be saved and re-used should the processor need to be removed at anytime in
the future.
Figure 19.
Installing the Processor – Remove the Cover
5.
Close the Load Plate. Carefully lower the load plate down over the processor.
Figure 20.
Installing the Processor – Close the Load Plate
6.
Lock down the Load Plate.
a)
Push down on the locking lever on the CLOSE 1st side (see letter
A
). Slide the tip of the lever under the
notch in the load plate (see letter
B
). Make sure the load plate tab engages under the socket lever when
fully closed.
b)
Repeat the steps to latch the locking lever on the other side (see letter
C
). Latch the levers in the order as
shown.
Figure 21.
Installing the Processor – Latch the Locking Lever
