Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide
August 2018
Page: 42
Revision 0.4
9.3.6
Cabling, Mounting and Antenna Consideration for the H1000 models
9.3.6.1
Antenna Cabling Infrastructure
Poorly or incorrectly installed RFID Antenna cabling can cause problems with the RRS-
H1000. Even a small kink in the cable can cause an impedance mismatch resulting in
poor tag read performance. Always be sure to follow the instructions provided by the
antenna manufacturer.
9.3.6.2
Recommended Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 6 dB. Antennas not included in this list or having a gain greater than 6
dB are strictly prohibited for use with this device. The required antenna impedance is 50
ohms.
Ce dispositif a été désigné pour fonctionner avec les antennes énumérées ci-dessous, et
ayant un gain maximum de 6 dB. Les antennes non incluses dans cette liste ou ayant un
gain plus grand que 6 dB sont strictement interdites pour l'utilisation avec cet appareil.
L'antenne requise impédance est 50 ohms.
9.3.6.2.1
Ceiling or Wall Mount
For ceiling or wall mount installations, the Laird RFID Panel Antenna S8655P (ETSI) or
S9025P (FCC) is recommended. These antennas have a circularly polarized pattern and
provide 5.5 dBi gain.
Figure 17 Circular Polarized Panel Antenna
