
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
August 2018
User & Installation Guide
Revision 0.4
Page: 29
continue until no more tags are singulated.
The valid values are “true" or “false".
start_q_value
The initial Q value to use at the beginning of an inventory round
(valid when q_algorithm = Dynamic).
The valid range of this parameter is 0
– 15.
min_q_value
The minimum Q value that would ever be used during an
inventory round (valid when q_algorithm = Dynamic).
The valid range of this parameter is 0
– 15.
max_q_value
The maximum Q value that would ever be used during an
inventory round (valid when q_algorithm = Dynamic).
The valid range of this parameter is 0
– 15.
threshold_multiplier
A 4X multiplier applied to the Q-adjustment threshold as part of
the dynamic-Q algorithm.
The valid range of this parameter is 0
– 255.
retry_count
The number of times to try another execution of the singulation
algorithm before either toggling the target flag or terminating
the operation.
The valid range of this parameter is 0
– 255.
toggle_target_flag
Specifies whether or not to toggle the targeted flag.
The valid values are “true" or “false".
toggle_mode
When
toggle_target_flag
is true, this value specifies when to
toggle the targeted flag. The valid values are “None”,
“OnInvCycle", OnInvRound”, or “OnReadRate".
perform_select
Specifies whether or not to perform a select command based
on the previously configured criteria
The valid values are “true" and “false".
perform_post_match
Specifies whether or not to perform a post singulation match
based on the previously configured criteria.
The valid
values are “true" and “false".
filter_duplicates
Specifies whether or not the RFID Sensor Platform should filter
out duplicate tag information before sending to the Gateway.
The valid values are “true" or “false".
auto_repeat
Specifies whether or not to continue performing inventory
rounds until the “stop_inventory" command is received.
When this value is "No", an "inventory_complete" indication will
be sent from the RFID Sensor Platform to the RRS Gateway at
the end of the inventory round.
The valid val
ues are “true" and “false".
delay_time
The amount of time (ms) that the transmitter is turned off
between subsequent inventory rounds. Used when
"auto_repeat" is true to control the transmit duty cycle.
The valid range is 0
– 65535.
Parameter / Profile Index
0
1
2
3
4
Modulation Type
DSB-
ASK
PR-ASK
PR-ASK
DSB-
ASK
DSB-
ASK
Tari Duration (us)
25
25
25
6.25
6.25
Data 0/1 Difference
1
0.5
0.5
0.5
0.5
Pulse Width (us)
12.5
12.5
12.5
3.13
3.13
R-T Calculation (us)
75
62.5
62.5
15.63
15.63