
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide
August 2018
Page: 24
Revision 0.4
6.3.2
GREEN (Power On)
An LED state of "solid green" is the default to indicate power has been successfully
applied to the RRS. This initial LED state should not last longer than 2
– 3 minutes.
After 2
– 3 minutes, the LED color should transition to indicate successful OS boot.
6.3.3
Light BLUE
An LED state of “solid light blue" indicates the RRS-Sensors has successfully booted to
the Linux OS, but the RFID Applications are not yet running.
6.3.4
Flashing WHITE
An LED state of
“flashing white" after boot up indicates the RRS-Sensors is in the
process of discovering the RFID Gateway. The state of
“flashing white" can also be
commanded (i.e. Beacon Mode) by the Gateway via JavaScript Object Notation (JSON)
Remote Procedure Call (RPC) for visually identifying the RRS.
6.3.5
Solid PURPLE
An LED state of “solid purple" indicates the RRS-Sensors is waiting to read a security
provisioning tag.
6.3.6
Flashing PURPLE
After a security provisioning tag has been successfully read, the RRS-Sensors LED state
will be “flashing purple" for a period of 5 seconds.
6.3.7
Solid Yellow (Idle)
Following Gateway Discovery, an LED state of “solid yellow" indicates that The RRS-
Sensors is in the idle state and ready to accept commands.
6.3.8
BLUE
An LED state of “solid blue" indicates the RRS-Sensors is currently in an Inventory Cycle
(i.e. transmitting) but not receiving any tag data.
6.3.9
Flashing BLUE
An LED state of “flashing blue" indicates the RRS-Sensors is currently in an Inventory
Cycle (i.e. transmitting) and successfully communicating with RFID tags.
6.3.10
Flashing RED
An LED state of “flashing red" indicates the RRS-Sensors has detected a failure. This
will continue until the alert is acknowledged by the RFID Gateway or the CLI.