
Intel® Responsive Retail Sensor (RRS) Hx Series Sensor
User & Installation Guide
August 2018
Page: 10
Revision 0.4
除非另外特别的标注
,
此标志为针对所涉及产品的环保使用期限标志
.
某些可更换的零部件可能会有一个不同的环保使用期限
(
例如
,
电池单元模块
).
此环保使用期限只适用于产品在产品手册中所规定的条件下工作
.
The Environmental Protection Use Period (EPUP) for all enclosed products and their parts are per the symbol shown here, unless otherwise marked.
Certain field-replaceable parts may have a different EPUP (for example, battery modules) number. The Environment-Friendly Use Period is valid
only when the product is operated under the conditions defined in the product manual.
1.5
H1000 Specific Instruction & Warning
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 8.5 dBi. Antennas not included in this list or having a gain greater than
8.5 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
Ce dispositif a été désigné pour fonctionner avec les antennes énumérées ci-dessous, et
ayant un gain maximum de 8.5 dBi. Les antennes non incluses dans cette liste ou ayant
un gain plus grand que 8.5 dBi sont strictement interdites pour l'utilisation avec cet
appareil. L'antenne requise impédance est 50 ohms.
(A) The recommended antenna types for the H1000 unit are listed below (and section
10.3.6.2):
a. Ceiling/Wall Mounting: Laird RFID Panel Antenna, S8655P (ETSI) or
S9025P (FCC). This antenna has a circularly polarized pattern and provide
5.5 dBi gain.
b. Tabletop Point-of-Sale (POS): Times-7 RFID Near-Field Antenna, A1030.
This antenna has a circularly polarized pattern and provides -15.0 dBi gain.
(B) The H1000 has 4x external ports, connector type Reverse Polarity SMA (SMA-R).
The maximum allowable torque for these external connectors is 10 in-lbs, max.
(C) It is possible that these port connectors require an RF adapter depending upon the
actual antenna that is used
and it’s mating connector type.