Intel Core 2 Duo E4300 Design Manual Download Page 55

Page: 55 / 55

Intel

Core

2 Duo E6400, E4300, and Intel

Pentium

Dual-Core E2160 Processor—Intel®

Enabled Reference Solution Information

Intel

Core

2 Duo E6400, E4300, and Intel

Pentium

Dual-Core E2160 Processor

TDG

October 2007

Order Number: 315279 - 003US

Appendix E Intel® Enabled Reference Solution

Information

This appendix includes supplier information for Intel enabled vendors for the PICMG 1.3

thermal solution.

Table 5

lists suppliers that produce Intel enabled reference components. The part

numbers listed below identify these reference components. End-users are responsible

for the verification of the Intel enabled component offerings with the supplier. OEMs

and System Integrators are responsible for thermal, mechanical and environmental

validation of these solutions.

Note:

These vendors and devices are listed by Intel as a convenience to Intel's general

customer base, but Intel does not make any representations or warranties whatsoever

regarding quality, reliability, functionality or compatibility of these devices. This list

and/or these devices may be subject to change without notice.

Table 5.

Intel Reference Component PICMG 1.3 Thermal Solution Providers

Supplier

Part

Number

Contact

Phone

Email

AVC*

(ASIA Vital

Components Co., Ltd.)

C69175

David Chao

+886-2-22996930

Extension: 619

[email protected]

Summary of Contents for Core 2 Duo E4300
























































Search results

Summary of Contents for Core 2 Duo E4300

Reviews:

Intel Core 2 Duo E4300, Design Manual, Page: 55 / 55

Search results

Summary of Contents for Core 2 Duo E4300

Reviews: