Intel Core 2 Duo E4300 Design Manual Download Page 51

Page: 51 / 55

Intel

Core

2 Duo E6400, E4300, and Intel

Pentium

Dual-Core E2160 Processor

October 2007

TDG

Order Number: 315279 - 003US

Case Temperature Reference Metrology—Intel

Core

2 Duo E6400, E4300, and Intel

Pentium

Dual-Core E2160 Processor

Appendix C Case Temperature Reference Metrology

C.1

Objective and Scope

This appendix defines a reference procedure for attaching a thermocouple to the IHS of

a 775-land LGA package for TC measurement. This procedure takes into account the

specific features of the 775-land LGA package and of the LGA775 socket for which it is

intended. The recommended equipment for the reference thermocouple installation,

including tools and part numbers are also provided. In addition, a video that shows the

process in real time - Thermocouple Attach Using Solder - Video CD-ROM - is available.

For information on case temperature reference setup, tool use, and approach, please

refer to Intel® Core™2 Duo Processor and Intel® Pentium® Dual Core Processor

Thermal and Mechanical Design Guidelines, Appendix D.

Summary of Contents for Core 2 Duo E4300
























































Search results

Summary of Contents for Core 2 Duo E4300

Reviews:

Intel Core 2 Duo E4300, Design Manual, Page: 51 / 55

Search results

Summary of Contents for Core 2 Duo E4300

Reviews: