manualshive.com logo in svg

Intel Core 2 Duo E4300, Design Manual, Page: 10 / 55

Share
Download
Intel Core 2 Duo E4300 Design Manual Download Page 10

Intel

®

 Core

TM

 2 Duo E6400, E4300, and Intel

®

 Pentium

®

 Dual-Core E2160 Processor—

Introduction

Intel

®

 Core

TM

 2 Duo E6400, E4300, and Intel

®

 Pentium

®

 Dual-Core E2160 Processor

TDG

October 2007

10

Order Number: 315279 - 003US

§ §

 

Ψ

SA

Sink-to-ambient thermal characterization parameter. A measure of heatsink thermal 

performance using total package power. Defined as (T

S

 - T

A

) / Total Package Power.

Note: Heat source must be specified for 

Ψ

 measurements.

TIM

Thermal Interface Material: The thermally conductive compound between the heatsink and 

the processor case. This material fills the air gaps and voids, and enhances the transfer of 

the heat from the processor case to the heatsink.

P

MAX

The maximum power dissipated by a semiconductor component.

TDP

Thermal Design Power: a power dissipation target based on worst-case applications. 

Thermal solutions should be designed to dissipate the thermal design power. 

IHS

Integrated Heat Spreader: a thermally conductive lid integrated into a processor package 

to improve heat transfer to a thermal solution through heat spreading.

LGA775 Socket

The surface mount socket designed to accept the processors in the 775-Land LGA 

package.

ACPI

Advanced Configuration and Power Interface.

Bypass

Bypass is the area between a passive heatsink and any object that can act to form a duct. 

For this example, it can be expressed as a dimension away from the outside dimension of 

the fins to the nearest surface.

Thermal Monitor A feature on the processor that attempts to keep the processor die temperature within 

factory specifications.

TCC

Thermal Control Circuit: Thermal Monitor uses the TCC to reduce die temperature by 

lowering effective processor frequency when the die temperature has exceeded its 

operating limits.

T

DIODE

Temperature reported from the on-die thermal diode.

FSC

Fan Speed Control: Thermal solution that includes a variable fan speed which is driven by 

a PWM signal and uses the on-die thermal diode as a reference to change the duty cycle of 

the PWM signal.

T

CONTROL

T

CONTROL

 is the specification limit for use with the on-die thermal diode.

PWM

Pulse width modulation is a method of controlling a variable speed fan. The enabled 4 wire 

fans use the PWM duty cycle percent from the fan speed controller to modulate the fan 

speed.

Health Monitor 

Component

Any standalone or integrated component that is capable of reading the processor 

temperature and providing the PWM signal to the 4 pin fan header.

TMA

Thermal Module Assembly. The heatsink, fan and duct assembly for the BTX thermal 

solution.

Table 2.

Terms Used  (Sheet 2 of 2)

Term

Description

Summary of Contents for Core 2 Duo E4300
























































Reviews:

No comments