Intel BX80623I32100, Datasheet

Page: 19 / 112

Datasheet, Volume 1 19
Interfaces
2
Interfaces
This chapter describes the interfaces supported by the processor.
2.1 System Memory Interface
2.1.1 System Memory Technology Supported
The Integrated Memory Controller (IMC) supports DDR3 protocols with two
independent, 64-bit wide channels each accessing one or two DIMMs. The type of
memory supported by the processor is dependant on the PCH SKU in the target
platform. Refer to
Chapter 1 for supported memory configuration details.
It supports a maximum of two DDR3 DIMMs per-channel; thus, allowing up to four
device ranks per-channel.
• DDR3 Data Transfer Rates
— 1066 MT/s (PC3-8500), 1333 MT/s (PC3-10600)
• DDR3 SO-DIMM Modules
— Raw Card A – Dual Ranked x16 unbuffered non-ECC
— Raw Card B – Single Ranked x8 unbuffered non-ECC
— Raw Card C – Single Ranked x16 unbuffered non-ECC
— Raw Card F – Dual Ranked x8 (planar) unbuffered non-ECC
• Desktop PCH platform DDR3 DIMM Modules
— Raw Card A – Single Ranked x8 unbuffered non-ECC
— Raw Card B – Dual Ranked x8 unbuffered non-ECC
— Raw Card C – Single Ranked x16 unbuffered non-ECC
• Advanced Server/Workstation PCH platforms DDR3 DIMM Modules:
— Raw Card A – Single Ranked x8 unbuffered non-ECC
— Raw Card B – Dual Ranked x8 unbuffered non-ECC
— Raw Card C – Single Ranked x16 unbuffered non-ECC
— Raw Card D – Single Ranked x8 unbuffered ECC
— Raw Card E – Dual Ranked x8 unbuffered ECC
• Essential/Standard Server PCH platforms DDR3 DIMM Modules:
— Raw Card D – Single Ranked x8 unbuffered ECC
— Raw Card E – Dual Ranked x8 unbuffered ECC
DDR3 DRAM Device Technology: 1-Gb, 2-Gb, and 4 Gb DDR3 DRAM Device
technologies and addressing are supported.