manualshive.com logo in svg

Intel BFCBASE - Motherboard - 7300, Datasheet, Page: 136 / 142

Share
Download
Intel BFCBASE - Motherboard - 7300 Datasheet Download Page 136

Features

136

Document Number: 318080-002

7.4.3.8.4

Additional Processor Feature Flags

This location contains additional feature information for the processor. This field is 
defined as follows: Writes to this register have no effect.

Bits are set when a feature is present, and cleared when they are not.

7.4.3.8.5

Thermal Adjustment Factors

This location contains information on thermal adjustment factors for the processor. This 
field and it’s details are pending and will be updated in a future revision. Writes to this 
register have no effect.

7.4.3.9

Other Data 

These locations are reserved. Writes to this register have no effect.

7.4.3.9.1

FDCKS: Feature Data Checksum

This location provides the checksum of the Feature Data Section. Writes to this register 
have no effect.

Offset:

79h

Bit

Description

7:2

Number of cores

1:0

Number of threads per core

Offset:

7Ah

Bit

Description

7

Reserved

6

Intel

® 

Cache Safe Technology

5

Extended Halt State (C1E)

4

Intel

®

 Virtualization Technology

3

Execute  Disable

2

Intel

®

 64

1

Thermal Monitor 2

0

Enhanced Intel Speed Step

®

 Technology

Offset:

7Bh-7Ch

Bit

Description

15:8

Measurement Correction Factor

7:0

Temperature Target

Offset:

7Dh-7Eh

Bit

Description

15:0

RESERVED

Summary of Contents for BFCBASE - Motherboard - 7300















































































































































Reviews:

No comments