manualshive.com logo in svg

Intel BFCBASE - Motherboard - 7300, Datasheet, Page: 128 / 142

Share
Download
Intel BFCBASE - Motherboard - 7300 Datasheet Download Page 128

Features

128

Document Number: 318080-002

7.4.3.3.3

MPSUP: Multiprocessor Support

This location contains 2 bits for representing the supported number of physical 
processors on the bus. These two bits are MSB aligned where 00b equates to single-
processor operation, 01b is a dual-processor operation, and 11b represents multi-
processor operation. The Intel

®

 Xeon

®

 Processor 7200 Series and 7300 Series is an MP 

processor. The remaining six bits in this field are reserved for the future use. Writes to 
this register have no effect.

Example: An MP processor will use C0h at offset 1Ch.

7.4.3.3.4

MCF: Maximum Core Frequency

This location contains the maximum core frequency for the processor.  Format of this 
field is in MHz, rounded to a whole number, and encoded in hex format. Writes to this 
register have no effect.

Example: A 2.666 GHz processor will have a value of 0A6Ah, which equates to 2666 
decimal.

7.4.3.3.5

MAXVID: Maximum Core VID

This location contains the maximum Core VID (Voltage Identification) voltage that may 
be requested via the VID pins. This field, rounded to the next thousandth, is in mV and 
is reflected in hex. Writes to this register have no effect.

Example: A voltage of 1.350 V maximum core VID would contain 0546h (1350 
decimal) in Offset 1F - 20h.

Offset:

1Ch

Bit

Description

7:6

Multiprocessor Support

UP, DP or MP indictor

00b: UP

01b: DP

10b: Reserved

11b: MP

5:0

RESERVED

000000b-111111b: Reserved

Offset:

1Dh-1Eh

Bit

Description

15:0

Maximum Core Frequency

0000h-FFFFh: MHz

Offset:

1Fh-20h

Bit

Description

15:0

Maximum Core VID

0000h-FFFFh: mV

Summary of Contents for BFCBASE - Motherboard - 7300















































































































































Reviews:

No comments