manualshive.com logo in svg

Intel BFCBASE - Motherboard - 7300, Datasheet, Page: 129 / 142

Share
Download
Intel BFCBASE - Motherboard - 7300 Datasheet Download Page 129

Document Number: 318080-002

129

Features

7.4.3.3.6

MINV: Minimum Core Voltage

This location contains the minimum Processor Core voltage. This field, rounded to the 
next thousandth, is in mV and is reflected in hex. The minimum V

CC

 reflected in this 

field is the minimum allowable voltage assuming the FMB maximum current draw. 
Writes to this register have no effect.

Note:

The minimum core voltage value in offset 21 - 22h is a single value that assumes the 

FMB maximum current draw. Refer to 

Table 2-10

 and 

Table 2-11

 for the minimum core 

voltage specifications based on actual real-time current draw.

Example: A voltage of 1.000 V minimum core voltage would contain 03E8h (1000 
decimal) in Offset 21 - 22h.

7.4.3.3.7

TCASE: T

CASE

 Maximum

This location provides the maximum T

CASE

 for the processor. The field reflects 

temperature in degrees Celsius in hex format. This data can be found in 

Section 6

. The 

thermal specifications are specified at the case Integrated Heat Spreader (IHS).Writes 
to this register have no effect.

Example: A temperature of 66C would contain 42h (66 decimal) in Offset 23h.

7.4.3.3.8

PCDCKS: Processor Core Data Checksum

This location provides the checksum of the Processor Core Data Section. Writes to this 
register have no effect.

7.4.3.4

Cache Data 

This section contains cache-related data.

Offset:

21h-22h

Bit

Description

15:0

Minimum Core Voltage

0000h-FFFFh: mV

Offset:

23h

Bit

Description

7:0

T

CASE

 Maximum

00h-FFh: Degrees Celsius

Offset:

24h

Bit

Description

7:0

Processor Core Data Checksum

One Byte Checksum of the Processor Core Data Section

00h- FFh: See 

Section 7.4.4

 for calculation of the value

Summary of Contents for BFCBASE - Motherboard - 7300















































































































































Reviews:

No comments