108
Listening Mode Setup
—Continued
h. Subwoofer
This option configures the subwoofer to use when the
RDC-7.1 plays DVD-Audio. Select the terminal to
which the subwoofer you want to use is connected. This
setting can be made when the “(Speaker A) Subwoofer”
is set to an option other than “Not Used” in the Speaker
Configuration sub-menu. However, when the “(Speaker
B) Subwoofer” is set to an option other than “Main A”
in the Speaker Configuration sub-menu, the available
options will be “A” or “Not Used.”
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play a Super Audio CD
input from the i.LINK(AUDIO) interface.
This sub-menu appears when the i.LINK(AUDIO)
terminal board [A] is inserted.
a. LFE Level
This option allows you to set the bass level for the
i.LINK(IEEE1394): SACD listening mode. The LFE
level setting made here will be applied to all of the
i.LINK(IEEE1394): SACD input signals. The available
settings are –
∞
dB, –20 dB, –10 dB, and 0 dB. The
option defaults to “0.”
b. SB Mode (5ch)
Selects the enhancement mode for playback when you
play a 5.1ch source as a 6.1 or higher channel source
through the RDC-7.1. The surround back setting you
select here will be applied to the
i.LINK(IEEE1394):SACD input signal “*/2.”
• When the “(Speaker A) Surr Back” is set to “Bi-Amp
for Front” or “Not Used” in the Speaker Configuration
sub-menu, this option will not be displayed.
Dolby EX:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Digital EX mode.
PLIIx Movie:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Movie
mode.
• When you set the (Speaker A) Surr Back setting to
“Main A 1ch (SBL)” in the Speaker Configuration
sub-menu, you cannot select “PLIIx Movie.”
PLIIx Music:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Music
mode.
NEO:6:
Plays a 5.1ch source as a 6.1 or higher channel
source using the DTS NEO:6 mode.
Off (Default):
Plays an original 5.1ch source as it is.
c. Re-EQ
This option allows you to configure whether the Re-EQ
effect is applied or not. Use this effect when you do not
want to overemphasize the treble sound.
Off (Default):
The effect is not applied.
On:
Adjusts the soundtrack in which the treble is
overemphasized, so that the sound is optimized for
home theater.
d. Front Speaker
This option configures the front speakers to use when
the RDC-7.1 plays a Super Audio CD. Select the
speakers you want to use. This setting can be made
when the “(Speaker B) Front L/R” is set to “Main A” in
the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the front speakers
configured to “Speaker A.”
B:
Outputs the source from the front speakers
configured to “Speaker B.”
A+B:
Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
e. Center Speaker
This option configures the center speaker to use when
the RDC-7.1 plays a Super Audio CD. Select the
speaker you want to use. This setting can be made when
the “(Speaker B) Center” is set to “Main A” in the
Speaker Configuration sub-menu.
A (Default):
Outputs the source from the center speaker
configured to “Speaker A.”
B:
Outputs the source from the center speaker
configured to “Speaker B.”
A+B:
Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
f. Surr L/R Sp
This option configures the surround speakers to use
when the RDC-7.1 plays a Super Audio CD. Select the
speakers you want to use. This setting can be made
when the “(Speaker B) Surr L/R” is set to “Main A” in
the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the surround
speakers configured to “Speaker A.”
B:
Outputs the source from the surround speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
i.LINK(IEEE1394):SACD Input Setup
Sub-menu
