107
Setup Men
u
Listening Mode Setup
—Continued
This sub-menu allows you to configure the audio effect
and playback options when you play DVD-Audio that is
input from the i.LINK(AUDIO) interface.
This sub-menu appears when the i.LINK(AUDIO)
terminal board [A] is inserted.
a. LFE Level
This option allows you to set the bass level for the
i.LINK(IEEE1394):DVD-Audio listening mode. The
LFE level setting made here will be applied to all of the
i.LINK(IEEE1394):DVD-Audio input signals. The
available settings are –
∞
dB, –20 dB, –10 dB, and 0 dB.
The option defaults to “0.”
b. SB Mode (5ch)
Selects the enhancement mode for playback when you
play a 5.1ch source as a 6.1 or higher channel source
through the RDC-7.1. The surround back setting you
select here will be applied to the
i.LINK(IEEE1394):DVD-Audio input signal “*/2.”
• When the “(Speaker A) Surr Back” is set to “Bi-Amp
for Front” or “Not Used” in the Speaker Configuration
sub-menu, this option will not be displayed.
Dolby EX:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Digital EX mode.
PLIIx Movie:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Movie
mode.
• When you set the (Speaker A) Surr Back setting to
“Main A 1ch (SBL)” in the Speaker Configuration
sub-menu, you cannot select “PLIIx Movie.”
PLIIx Music:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Music
mode.
NEO:6:
Plays a 5.1ch source as a 6.1 or higher channel
source using the DTS NEO:6 mode.
Off (Default):
Plays an original 5.1ch source as it is.
c. Re-EQ
This option allows you to configure whether the Re-EQ
effect is applied or not. Use this effect when you do not
want to overemphasize the treble sound.
Off (Default):
The effect is not applied.
On:
Adjusts the soundtrack in which the treble is
overemphasized, so that the sound is optimized for
home theater.
d. Front Speaker
This option configures the front speakers to use when
the RDC-7.1 plays DVD-Audio. Select the speakers you
want to use. This setting can be made when the
“(Speaker B) Front L/R” is set to “Main A” in the
Speaker Configuration sub-menu.
A (Default):
Outputs the source from the front speakers
configured to “Speaker A.”
B:
Outputs the source from the front speakers
configured to “Speaker B.”
A+B:
Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
e. Center Speaker
This option configures the center speaker to use when
the RDC-7.1 plays DVD-Audio. Select the speaker you
want to use. This setting can be made when the
“(Speaker B) Center” is set to “Main A” in the Speaker
Configuration sub-menu.
A (Default):
Outputs the source from the center speaker
configured to “Speaker A.”
B:
Outputs the source from the center speaker
configured to “Speaker B.”
A+B:
Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
f. Surr L/R Sp
This option configures the surround speakers to use
when the RDC-7.1 plays DVD-Audio. Select the
speakers you want to use. This setting can be made
when the “(Speaker B) Surr L/R” is set to “Main A” in
the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the surround
speakers configured to “Speaker A.”
B:
Outputs the source from the surround speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
g. Surr Bk Speaker
This option configures the surround back speakers to
use when the RDC-7.1 plays DVD-Audio. Select the
speakers you want to use. This setting can be made
when the “(Speaker B) Surr Back” is set to “Main A” in
the Speaker Configuration sub-menu. However, when
the “(Speaker A) Surr Back” is set to “Bi-Amp for
Front” or “Not Used,” this setting will not be displayed.
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker
Configuration sub-menu differ, the available options
will be “A” and “B.”
A (Default):
Outputs the source from the surround back
speakers configured to “Speaker A.”
B:
Outputs the source from the surround back speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround back
speakers configured to “Speaker A” and “Speaker B.”
i.LINK(IEEE1394):DVD-Audio Input
Setup Sub-menu
