Integra DTR-70.4 Instruction Manual Download Page 116

Page: 116 / 120

Appendix

En-116

■

Remote playback

• Windows Media Player 12
• DLNA-certified (within DLNA Interoperability

Guidelines version 1.5) media server or controller device.

The setting varies depending on the media server or
controller devices. Refer to your devices’ instruction
manual for details.
If the operating system of your personal computer is
Windows 7, Windows Media Player 12 is already installed.
For more information, see the Microsoft web site.

• USB mass storage device class (but not always

guaranteed).

• FAT16 or FAT32 file system format.
• If the storage device has been partitioned, each section

will be treated as an independent device.

• Up to 20,000 folders can be displayed, and folders may

be nested up to 16 levels deep.

• USB hubs and USB devices with hub functions are not

supported.

Note

• If the media you connect is not supported, the message “

Storage

” will be displayed.

• If you connect a USB hard disk drive to the AV receiver’s

USB

port, we recommend that you use its AC adapter to power it.

• The AV receiver supports USB MP3 players that support the

USB Mass Storage Class standard, which allows USB devices to
be connected to computers without the need for special drivers or
software. Note that not all USB MP3 players support the USB
Mass Storage Class standard. Refer to your USB MP3 player’s
instruction manual for details.

• Protected WMA music files on an MP3 player cannot be played.
• Onkyo accepts no responsibility whatsoever for the loss or

damage to data stored on a USB device when that device is used
with the AV receiver. We recommend that you back up your
important music files beforehand.

• MP3 players containing music files that are managed with special

music software are not supported.

• Operation is not guaranteed for all USB devices, which includes

the ability to power them.

• Do not connect your USB device via a USB hub. The USB device

must be connected directly to the AV receiver’s

USB

port.

• If the USB device contains a lot of data, the AV receiver make

take a while to read it.

• USB devices with security functions cannot be played.

For server playback and playback from a USB device, the
AV receiver supports the following music file formats.
Variable bit-rate (VBR) files are supported. However,
playback times may not display correctly.

Note

• With remote playback, the AV receiver does not support the

following music file formats: FLAC, Ogg Vorbis, DSD and
Dolby TrueHD.

• In the case of server playback, the above-mentioned file formats

may not be played depending on the server type.

■

MP3 (.mp3 or .MP3)

• MP3 files must be MPEG-1/MPEG-2 Audio Layer 3

format with sampling rates of 8 kHz, 11.025 kHz,
12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz and bitrates of between 8 kbps and 320 kbps.
Incompatible files cannot be played.

■

WMA (.wma or .WMA)

WMA stands for Windows Media Audio and is an audio
compression technology developed by Microsoft
Corporation. Audio can be encoded in WMA format by
using Windows Media

Player.

• WMA files must have the copyright option turned off.
• Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,

22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, bitrates of
between 5 kbps and 320 kbps, and WMA DRM are
supported.

• WMA Pro/Voice formats are not supported.

■

WMA Lossless (.wma or .WMA)

• Sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

are supported.

• Quantization bit: 16 bit, 24 bit

Minimum system requirements for Windows Media
Player 11 on Windows XP
Operating system

Windows XP Home Edition (SP2), Windows XP
Professional (SP2), Windows XP Tablet PC Edition
(SP2), Update Rollup 2 for Windows XP Media Center
Edition 2005 (KB900325), October 2006 Update Rollup
for Windows XP Media Center Edition (KB925766)

Processor:

233 MHz Intel Pentium II, Advanced
Micro Devices (AMD), etc.

Memory:

64 MB

Hard disk:

200 MB of free space

Drive:

CD or DVD drive

Modem:

28.8 kbps

Sound card:

16-bit sound card