Advanced Operations
En-86
See “Multi Zone” (
➔
page 79
).
■
Operating on the AV receiver
Tip
• The Whole House Mode function shares the input source of main
room with Multi Zone (
➔
page 51
).
■
Operating on the remote controller
To control Zone 2/3/4, you must press
Zone
on the remote
controller first.
Zone
turns red while Zone 2 is on, and green while Zone 3
is on, and amber while Zone 4 is on.
Adjusting the Volume for Zones
■
Operating on the remote controller
■
Operating on the AV receiver
If your Zone 2/3/4 speakers are connected to a receiver or
integrated amplifier in Zone 2/3/4, use its volume control
to adjust the volume.
Setting the Zone 2/3/4 Out
Controlling Multi Zone Components
1
To turn on Zone 2/3/4 and select an input source,
press
Zone 2
,
Zone 3
, or
Zone 4
followed by an
input selector button within 8 seconds.
Zone 2/3/4 turns on, the
Z2
,
Z3
, or
Z4
indicator lights
on the AV receiver’s display.
Tip
• The corresponding trigger output goes high (+12 V).
To select AM or FM, press
Zone 2
,
Zone 3
, or
Zone 4
and the
Tuner
input selector repeatedly.
To select the same source as the main room’s, press
Zone 2
,
Zone 3
, or
Zone 4
twice. “
Zone 2
Selector: Source
”, “
Zone 3 Selector: Source
”, or
“
Zone 4 Selector: Source
” appears on the AV
receiver’s display.
Input selector buttons
Zone 2
,
Off
Zone 3
,
Off
Tone
Master Volume
–
,
+
Zone 4
,
Off
2
To turn off Zone 2/3/4, press
Off
for each Zone.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
1
Press
Zone
repeatedly, then point the remote
controller at the AV receiver and press
8
Receiver
.
Zone 2/3/4 turns on, the
Z2
,
Z3
, or
Z4
indicator lights
on the AV receiver’s display.
Tip
• The corresponding trigger output goes high (+12 V).
2
To select an input source for Zone 2/3/4, press
Zone
repeatedly, followed by an
Input Selector
button.
To select AM or FM, press
Zone
and the
Tuner
input
selector repeatedly.
8
Receiver
Muting
VOL
q
/
w
Zone
Input selector buttons
3
To turn off Zone 2/3/4, press
Zone
repeatedly,
followed by
8
Receiver
.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
1
Press
Zone
repeatedly.
2
Use
VOL
q
/
w
.
1
Press
Zone 2
,
Zone 3
, or
Zone 4
(the Z2/Z3/Z4
indicator on the AV receiver’s display flashes).
2
Use
Master Volume
control within 8 seconds.
