Connections
En-19
Note
*1
Do not connect the AV receiver’s
USB
port to a USB port on
your computer. Music on your computer cannot be played
through the AV receiver in this way.
*2
Only the front-panel USB input is compatible with
iPod/iPhone and Onkyo wireless LAN adapter UWF-1.
UWF-1 can be used with the contents of not more than 64 kHz,
not compatible with Dolby TrueHD and DSD.
*3
When the
USB
input is selected, you can input video signals
from the
AUX Input Video
jack. Video signals input from
AUX Input Video
will be output from
MONITOR OUT V
,
COMPONENT VIDEO MONITOR OUT
, and the HDMI
output jacks.
Select which of
COMPONENT VIDEO MONITOR OUT
and the HDMI output jacks will output the video signal in the
“
Monitor Out
” setting (
➔
page 59
).
*4
Connect a turntable (MM) that has a built-in phono preamp to
TV/CD IN
, or connect it to
PHONO IN
with the phono
preamp turned off. If your turntable (MM) doesn’t have a
phono preamp, connect it to
PHONO IN
. If your turntable has
a moving coil (MC) type cartridge, you’ll need a commercially
available MC head amp or MC transformer to connect to
PHONO IN
. See your turntable’s manual for details.
If your turntable has a ground wire, connect it to the AV
receiver’s
GND
screw. With some turntables, connecting the
ground wire may produce an audible hum. If this happens,
disconnect it.
*5
When you connect your personal computer to
PC IN
and select
the
PC
input selector, the video of the personal computer is
output from the HDMI outputs. However, if you have assigned
the HDMI inputs to the
PC
input selector, the AV receiver will
output signals received from the HDMI inputs instead of
signals from
PC IN
, based on the priority order of HDMI >
component video > PC IN (analog RGB). To have the signals
output from
PC IN
, select “
- - - - -
” for “
PC
” in the “
HDMI
Input
” setting (
➔
page 60
).
• With connection
D
, you can enjoy Dolby Digital and
DTS. (To listen in Zone 2/3/4 as well, use
D
and
F
.)
• With connection
G
, you can enjoy analog video from
external components while you are in Zone 2.
• With connection
F
, you can enjoy audio from external
components while you are in Zone 2/3/4.
• With connection
F
, if your Blu-ray Disc/DVD player
has both the main stereo and multichannel outputs, be
sure to connect the main stereo.
No. Jack/Port
Components
G
VIDEO IN
1 (BD/DVD)
Blu-ray Disc/DVD player
✔
2 (CBL/SAT)
Satellite/cable set-top box,
etc.
✔
3 (STB/DVR)
Set top box/digital video
recorder, etc
✔
4 (GAME 1)
Game console, RI dock
✔
H
MONITOR OUT
TV, projector, etc.
I
COMPONENT VIDEO
MONITOR OUT
TV, projector, etc.
IN 1 (BD/DVD)
Blu-ray Disc/DVD player,
RI dock
✔
IN 2 (CBL/SAT)
Satellite/cable set-top box,
RI dock, etc.
✔
J
ZONE 2 OUT
TV, projector, etc.
K
PC IN
*5
Personal computer
