88
En
■
Can’t access the server or Internet radio
■
Playback stops while listening to music files on
the server
■
Can’t connect to the AV receiver from a Web
browser
■
Can’t access the music files on a USB device
■
Standby power consumption
■
The sound changes when I connect my
headphones
■
The speaker distance cannot be set as required
■
How do I change the language of a multiplex
source
■
The
u
functions don’t work
■
The functions System Off/Auto Power On and
Direct Change don’t work for components
connected via
u
■
When performing “Automatic Speaker Setup”,
the measurement fails and the message
“Ambient noise is too high.” is displayed.
Music Server and Internet Radio
Check the network connection between the AV
receiver and your router or switch.
—
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
—
Make sure the server is up and running and
compatible with the AV receiver.
99
,
101
Check the “
Network
” settings.
65
Make sure your server is compatible with the AV
receiver.
99
,
101
If you download or copy large files on your
computer, playback may be interrupted. Try closing
any unused programs, use a more powerful
computer, or use a dedicated server.
—
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be
interrupted. Reduce the number of playback devices
on the network, upgrade your network, or use a
switch instead of a hub.
—
If you’re using DHCP, your router may not always
allocate the same IP address to the AV receiver, so if
you find that you can’t connect to a server or Internet
radio station, recheck the AV receiver’s IP address
on the “
Network
” screen.
65
Check the “
Network
” settings.
65
USB Device Playback
Make sure the USB device is plugged in properly.
—
The AV receiver supports USB devices that support
the USB mass storage device class. However,
playback may not be possible with some USB
devices even if they conform to the USB mass
storage device class.
—
USB memory devices with security functions cannot
be played.
—
Others
In the following cases, the power consumption in
standby mode may reach up to a maximum of
45W
(DTR-80.3 North American models)
/ 50W
(DTR-80.3 Other models)
/ 115W
(DTR-70.3 All
models):
– You are using the Universal Port jack.
– “
Network Control
” is set to “
Enable
” in the
“
Network
” setting.
– “
HDMI Control(RIHD)
” setting is set to “
On
”.
(Depending on the TV status, the AV receiver
will enter standby mode as usual.)
– The “
HDMI Through
” setting is set to other than
“
Off
”.
18
,
64
,
65
When a pair of headphones is connected, the
listening mode is set to Stereo, unless it’s already set
to Stereo, Mono, or Direct.
—
In some cases, corrected values suitable for home
theater use may be set automatically.
—
Use the “
Multiplex
” setting on the “
Audio Adjust
”
menu to select “
Main
” or “
Sub
”.
53
To use
u
, you must make an
u
connection and
an analog audio connection (RCA) between the
component and AV receiver, even if they are
connected digitally.
20
While Zone 2, Zone 3, or Zone 4 is selected, the
u
functions don’t work.
20
While Zone 2, Zone 3, or Zone 4 is selected, the
u
functions don’t work.
20
This can be caused by a malfunction in your speaker
unit. Check if the unit produces normal sounds.
—
Summary of Contents for DTR-70.3
Page 1: ...AV Receiver DTR 80 3 DTR 70 3 Instruction Manual...
Page 106: ...106 En Memo...
Page 107: ...107 En Memo...