43
En
By using
Activities
in Easy macro mode, you can
sequentially operate Integra/Onkyo components via
simple commands from a single-button press. These
commands are user-definable. See “Using Normal
Macros” (
➔
page 83
).
■
My Movie
First, the TV, the Integra/Onkyo Blu-ray Disc player, and
the AV receiver are turned on. The input selector is set to
“
BD/DVD
”. Finally the player starts playback.
*1
*1
Depending on the start-up time of your Blu-ray Disc/DVD
player, the AV receiver may not activate this playback
command. In this case, press
1
on the remote controller.
■
My TV
First, the TV, the cable set-top box, and the AV receiver
are turned on. Then the input selector is set to
“
CBL/SAT
”.
■
My Music
The Integra/Onkyo CD player and the AV receiver are
turned on. The input selector is set to “
TV/CD
”. Finally,
the player starts playback.
Note
• While the Easy Macro command is being processed, you cannot
use other
Activities
. If you want to operate other components,
first press
All Off
and use the desired
Activities
.
Turning Off the Components
This button turns off all components activated by the Easy
Macro mode.
First, the related components stop and turn off. Second,
the AV receiver turns off. Finally, the TV turns off (or
enters standby mode).
*1*2
*1
This step doesn’t apply to
My Music
, with the default
settings.
*2
With some televisions, the power may not be turned off (or
enter standby mode).
Changing the Source Components
You can change the source components activated by the
Easy Macro mode.
Examples:
If you wished to use
My Movie
to start the playback
component assigned to
VCR/DVR
of
Remote Mode
,
you would press and hold down
My Movie
for about 3
seconds while pressing down
VCR/DVR
of
Remote
Mode
.
Restoring Default
You can restore
Activities
to the default settings.
Using Headphones
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the
Phones
jack.
While the headphones plug is inserted in the
Phones
jack,
=
indicator, speaker/channel indicator
FL
and
FR
lights.
Note
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the
Phones
jack,
the speakers are turned off. (The Powered Zone 2/3/4
speakers are not turned off.)
• When you connect a pair of headphones, the listening mode
is set to Stereo, unless it’s already set to Stereo, Mono, or
Direct.
• If you connect an iPod or iPhone to the
USB
port on the
AV receiver, no sound will be output from the headphones
jack.
Using Easy Macros
1
Press
Activities
(
My Movie
,
My TV
, or
My Music
) to start the Easy macro command.
The default sequences of actions are described below.
To change the related source component, see
“Changing the Source Components” shown later in
this chapter.
1
Press
All Off
.
1
While holding down
Remote Mode
for the
playback component you wish to assign, press and
hold down the
Activities
to be changed
(
My Movie
,
My TV
, or
My Music
) (about 3
seconds).
Activities
flashes twice, indicating that the change is
complete.
1
While holding down
Home
, press and hold down
All Off
until
All Off
lights (about 3 seconds).
2
Release
Home
and
All Off
, and press
All Off
again.
All Off
flashes twice.
Summary of Contents for DTR-70.3
Page 1: ...AV Receiver DTR 80 3 DTR 70 3 Instruction Manual...
Page 106: ...106 En Memo...
Page 107: ...107 En Memo...
