45
It
De
Specifications
∫
Amplifier section
∫
Tuner section
∫
Network section
∫
Bluetooth
section
∫
General
Specifications and features are subject to change without notice.
Rated Output Power (FTC) (North American):
With 8 ohm loads, both channels driven, from 20-
20,000 Hz; rated 80 watts per channel minimum RMS
power, with no more than 0.1 % total harmonic
distortion from 250 milliwatts to rated output.
With 6 ohm loads, both channels driven, 1 kHz; rated
110 watts per channel minimum RMS power, with no
more than 0.1 % total harmonic distortion from 250
milliwatts to rated output.
Rated Output Power (IEC)
(Others) (*):
2 ch
k
135 W at 6 ohms, 1 kHz,
1 ch Driven of 1 % THD
MAXIMUM Effective Output
Power (JEITA) (Others) (*):
2 ch
k
140 W at 6 ohms, 1 kHz,
2 ch Driven of 10 % THD
* Power output specification is for when power supply is
230 V.
Dynamic Power (**):
** IEC60268-Short-term maximum output power
190 W (3
h
, Front)
170 W (4
h
, Front)
110 W (8
h
, Front)
THD+N (Total Harmonic DisNoise):
0.08 % (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance:
200 mV/47 k
h
(LINE)
3.5 mV/47 k
h
(PHONO MM)
Rated RCA Output Level and Impedance:
1 V/500
h
(PREOUT L/R)
1 V/680
h
(SUBWOOFER PREOUT)
1 V/2.2 k
h
(ZONE2 PRE/LINE OUT L/R/SUBWOOFER)
Phono Overload:
70 mV (MM 1 kHz 0.5 %)
Frequency Response:
10 Hz - 100 kHz/
i
1 dB,
j
3 dB
(DIRECT)
Tone Control Characteristics:
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio:
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance:
4
h
- 16
h
Headphone Output Impedance:
390
h
Headphone Rated Output:
200 mW
(32
h
, 1 kHz, 10 % THD)
FM Tuning Frequency Range:
87.5 MHz - 107.9 MHz
(North American)
87.5 MHz - 108.0 MHz,
RDS (Others)
AM Tuning Frequency Range:
530 kHz - 1710 kHz
(North American)
522/530 kHz - 1611/1710 kHz
(Others)
Preset Channel:
40
Ethernet LAN:
10BASE-T/100BASE-TX
Wireless LAN:
IEEE802.11 b/g/n standard
2.4 GHz band: 1 - 11 ch (North American)
1 - 13 ch (Others)
Communication system:
Bluetooth
Specification version 2.1 +EDR (Enhanced Data Rate)
Frequency band:
2.4 GHz (2.402 GHz - 2.480 GHz)
Modulation method:
FHSS
(Freq Hopping Spread Spectrum)
Compatible
Bluetooth
profiles:
A2DP 1.2
AVRCP 1.3
Supported Codecs:
SBC
Transmission range (A2DP):
20 Hz - 20 kHz
(Sampling frequency 44.1 kHz)
Maximum communication range:
Line of sight approx. 15 m (*)
* The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna's performance, operating
system, software application, etc.
Power Supply:
AC 120 V, 60 Hz (North American)
AC 220 - 230 V, 50/60 Hz (Others)
Power Consumption:
2.7 A (North American)
220 W (Others)
0.15 W (Standby, North American)
0.2 W (Standby, Others)
2.9 W (Hybrid Standby)
50 W (No-sound, North American)
45 W (No-sound, Others)
Dimensions (W × H × D):
435 mm × 149 mm × 328 mm
(17-1/8” × 5-7/8” × 12-15/16”)
Weight:
8.5 kg (18.7 lbs.)
Audio inputs
Digital:
OPTICAL 1 (GAME), 2 (TV/TAPE)
Maximum Fs: 96 kHz
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
Maximum Fs: 96 kHz
Analog:
RCA (BD/DVD, CBL/SAT, PC, GAME,
TV/TAPE, CD, PHONO)
Audio outputs
Analog:
SUBWOOFER PRE OUT
PRE OUT L/R
LINE OUT L/R
ZONE2 PRE/LINE OUT L/R
ZONE2 SUBWOOFER PRE/LINE OUT
Speaker Outputs:
SPEAKERS A: FRONT L/R
SPEAKERS B: FRONT L/R
Phones:
Phones (
φ
6.3)
Others
USB:
1 (USB1.1, 1.0 A)
RI:
1
Ethernet:
1
RS232:
1
12V TRIGGRER OUT:
A: 100 mA
B: 25 mA
C: 25 mA
IR:
IN:2, OUT:1
DTM40.7_mst.book 45 ページ ２０１５年７月２４日 金曜日 午後１２時５８分
