MoRoS ADSL 2.1 PRO
Functions
13.2
LAN (ext)
13.2.1
Configuring the Interface to the ADSL Modem (WAN)
The MoRoS ADSL 2.1 PRO uses its router function to switch the data traffic
between an "internal network" and an ADSL connection. The LAN ext interface
serves for connecting to the ADSL access. You can select here between a
connection with the ADSL access in the modes PPPoE (PPP over Ethernet), PPPoA
(PPP over ATM), Bridge, static IP or DHCP client.
Configuration via the web interface
In order to specify the operating mode, select in the "LAN (ext)" menu on
the "LAN (ext)" page the respective radio button.
For a bridge operation, select the radio button "Bridge". Then, the ADSL
connection behaves like another switch port. This is the mode IPoE (IP
over Ethernet).
For an ADSL connection over PPPoEto a WAN, configure in the "LAN
(ext)" menu on the "DSL" page the ADSL connection first. Then, select in
the "LAN (ext)" menu on the "LAN (ext)" page the radio button "PPPoE
connection".
For an ADSL connection over PPPoAto a WAN, configure in the "LAN
(ext)" menu on the "DSL" page the ADSL connection first. Then, select in
the "LAN (ext)" menu on the "LAN (ext)" page the radio button "PPPoA
connection".
In order to enable the DHCP client, select the "DHCP-Client" radio
button. In order to obtain another IP address for each host table entry,
check the checkbox "Request an additional IP address for each entry of
the host table".
In order to assign a fix IP address to the ADSL connection, select the
"static IP address" radio button. Then, enter into the entry fields "static IP
address" and "Netmask" an IPv4 address as well as a netmask. The IP
address must be an address from the external LAN, to which you
connect the router.
Check the checkbox "Retrieve IPv6 address automatically (SLAAC)" that
the router configures one or more IPv6 addresses automatically.
Enter the IPv6 address of the router in the LAN into the entry field "IPv6
address" or select the link "Generate new ULA" to generate a ULA
(Unique Local Address).
Save your settings by clicking "OK".
47
