MoRoS ADSL 2.1 PRO
Functions
13.1.3
Enter Static Route
You can define static routes for forwarding data packets in the MoRoS ADSL 2.1
PRO, which are loaded during system start.
Configuration via the web interface
In order to enter a static route, change in the menu "Basic Settings" to
the page "Routing".
Enter in the section "Add new route" the Net address, the Netmask
address as well as the Gateway into the respective fields for IPv4 or IPv6.
All fields must be completed that a new route for the respective IP
version is taken over into the table. Save the route by clicking "OK".
In order to delete an existing route, check under "Existing routes" the
checkbox of the route(s) to be deleted.
Save your settings by clicking "OK".
Neither a default gateway can be entered nor NAT can be enabled or
disabled here. This is configured in the menu "LAN (ext)" on the
respective page "Routing".
13.1.4
Entering Host Names
You can specify the host and domain name of the MoRoS ADSL 2.1 PRO here.
Moreover, a host table can be created, in which IP addresses are combined with
host names.
Configuration via the web interface
In order to enter the host name, change in the "Basic Settings" menu to
the "Host names" page and enter the host name into the "Host name"
field.
In order to enter the domain name, enter the domain name into the
"Domain name" field.
In order to enter a new host into the host table, enter in the "Add new
host" section the IP address and the associated Host name into the
respective fields. Save the host in the table by clicking "OK".
In order to delete an existing host, check under "Existing hosts" the
checkbox of the host(s) to be deleted.
Save your settings by clicking "OK".
45
