Insulet INT2-D001-MM-OUS2, User Manual

Page: 27 / 222

Omnipod DASH™ Insulin Management System 1
10
1 Omnipod DASH™ Insulin Management System
The PDM’s Lock and PIN Screens
After you set up your PDM, the Lock and PIN screens appear whenever you wake
up your PDM. The Lock and PIN screens help confirm that you are using the
correct PDM.
The Lock screen displays:
• Your selected background image
• Your customised message
• The amount of insulin on board, if the
Bolus Calculator is on
• Today’s date
• Any alarm or notification messages
Warning: Always identify the
PDM as yours before using it. Using
someone else’s PDM can result in
incorrect insulin delivery for both of
you.
Unlock your PDM
In the remainder of this
User Guide
,
instructions to “wake up” or “unlock” the
PDM mean to do the following:
1. Press the Power button briefly. See the PDM image on page 3 for the location
of the Power button.
2. Unlock the Lock screen by either swiping left to right or by swiping up from
the bottom. The PIN screen appears.
3. Enter your 4-digit PIN.
4. Tap the tick symbol. The Home screen or your most recent screen appears.
Note:
If a hazard alarm or an advisory alarm is occurring, the alarm message
appears.
Lock your PDM
To lock your PDM when you have finished using it:
1. Press the Power button briefly. This locks the PDM by putting it to sleep.
2. Store your PDM in a safe, accessible location.
Caution:
Only press the Power button briefly. If the PDM asks if you would like
to “Power off”, tap outside the message to cancel the instruction. Once you begin
Effective Date: 27SEP2019, ECO-000240