InStep Sync Owner'S Manual Download Page 6 | Manualshive

Page: 6 / 28

background image

• Use caution when turning on loose or uneven surfaces and

when going downhill.

• Allow extra clearance for the trailer when near curbs, parked

cars, and other obstacles.

•  Do not ride over curbs, bumps or holes.
•  Do not use the trailer in hazardous weather or at night.
•  Do not pull or push the trailer with a vehicle.
•  This product is not suitable for running or skating.
•  Red reflectors must be visible on the rear of the trailer
•  Never ride a bicycle at night without adequate lighting. Obey

all local legal requirements for lighting

RECOMMENDATIONS

• The manufacturer recommends the bicycle to be used with the

trailer undergo a safety check with a qualified bicycle mechanic

before attaching the trailer.

• The maximum weight that can be carried in the cabin pockets is

1 lb. each. The maximum weight that can be carried in the rear

storage area is 5 lbs.

• Attach a rearview mirror on the bicycle to check on the (child/

children) in the trailer.

WARNING!

CARE

• To clean the trailer: use only mild soap and water. Do not use

cleaning solvents.

• Routinely check that all fasteners and equipment (wheels,

reflectors, flag, etc) are tight and properly assembled.

• Check the tire pressure often. The recommended tire pressure

range is printed on the tire. Only use a foot or hand pump to

inflate.

• Have a qualified bicycle mechanic perform routine safety

checks on your bicycle before using with the trailer.

• Routine bicycle maintenance is recommended to be performed

every year.

• Do not leave trailer outside after use. Inclement weather and

harsh elements may stress the fabric on the trailer.

3 InStep Sync Trailer

«
...
4
5
6
7
8
...
»

Summary of Contents for Sync





























Reviews:

No comments

Related manuals for Sync

Brand: UFESA Pages: 27

Brand: Jetmaster Pages: 17

Brand: Qube Pages: 19

Brand: IBM Pages: 12

Brand: Olivetti Pages: 39

Event Master E2

Brand: Barco Pages: 2

Brand: Barco Pages: 7

Brand: Barco Pages: 7

Brand: Tailfin Pages: 8

Brand: Factor Pages: 15

Brand: Gardener's Pages: 2

Brand: PASCO Pages: 3

witty park XEV6 Series

Brand: hager Pages: 9

Brand: IFO Pages: 12

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Brand: Saful Pages: 7

Brand: Saft Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands