background image

Page 15 of 16                                                                            

 

2342-242/2444A3, 2342-442, 2342-542 Rev: 1/21/2014 7:24 AM

 

Certification and Warranty 

FCC & Industry Canada Compliance Statement 

This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference, including interference that may cause undesired operation of the device. 

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux 
conditions suivantes:  

(1) l'appareil ne doit pas produire de brouillage, et  

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le 

fonctionnement. 

The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and 
television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such 
interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following 
measures: 

-  Re-orient or relocate the receiving antenna of the device experiencing the interference 
-  Increase the distance between this device and the receiver 
-  Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver 
-  Consult the dealer or an experienced radio/TV technician 

WARNING: Changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to 
operate the equipment.  
 

DECLARATION OF CONFORMITY  

 
Hereby, INSTEON declares that this device is in compliance with the essential requirements and other relevant provisions of the following Directives: 
 

1) Electromagnetic Compatibility Directive 2004/108/EC 
2) Hazardous Substance Directive 2005/95/EC 

 
Technical data and copies of the original Declaration of Conformity are available and can be obtained from INSTEON; 16542 Millikan Ave, Irvine, CA, 
USA. 
 
 

User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) 

 
This document contains important information for users with regards to the proper disposal and recycling of INSTEON products. Consumers are 
required to comply with this notice for all electronic products bearing the following symbol: 

 

Environmental Information for Customers in the European Union 
 
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with 
unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.  
 
It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or 
local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.  
For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop 
where you purchased the product. 
 
 

DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and 
Liechtenstein 

 
Product category: general consumer (category 3). 
 
English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC 
 
Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. 
 
Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. 
 
Svenska [Swedish]: Denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av 
direktiv 1999/5/EG. 
 
Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC 
 

Summary of Contents for Mini Remote 2342-442

















Reviews: