About In-LineLinc Relay
In-LineLinc can be installed in-line for lighting fixtures, providing INSTEON control to individual fixtures.
Additionally, In-LineLinc eliminates the need for a conventional light switch – reducing “switch sprawl”
common to automation projects. You can also use In-LineLinc as an INSTEON signal repeater and phase
bridger (like an Access Point, #2443). In-LineLinc Relay Dual-Band supports voltages from 120 to 277V,
and loads up to 20 Amps, making it the perfect energy saving, wireless controller for commercial building
automation systems.
Off button
On button
LED
Set button
Features & Benefits
•
Once installed, setup is easy – links to other INSTEON devices in minutes
•
Controls resistive and inductive loads up to 20 Amps or incandescent loads up to 1800 Watts
•
Status LED and beeper shows INSTEON setup mode activity
•
Communicates simultaneously over both radio frequency (RF) and the power line
•
Acts as an access point for RF-only INSTEON devices
•
Stores setup state in memory so settings aren’t lost during power outages
•
Wires into standard J-boxes (requires a NEUTRAL connection)
•
Two-year warranty
Page 3 of 12 2475SDB - Rev: 10/24/2011 3:17 PM