43
BIOS Settings
Parameter
Description
Default Setting /
Format
Flow Control
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be sent
to re-start the flow. Hardware flow control
uses two wires to send start/stop signals
Options: None and Hardware RTS/CTS
None
VT-UTF8 Combo Key
Support
Enable/Disable the VT-UTF8 Combo Key
Support.
Options: Enabled/Disabled
Enabled
Recorder Mode
When this mode enabled, only texts will be
send. This is to capture Terminal data.
Options: Enabled/Disabled
Disabled
Redirection 100×31
Enable/Disable extended terminal resolution.
Options: Enabled/Disabled
Disabled
Putty KeyPad
Selects FunctionKey and KeyPad on Putty.
Options:
VT100/LINUX/XTERMR6/SCO/ESCN/VT400
VT100
6.2.2.4 PCI Subsystem Settings
Set the PCI subsystem information.
