35
BIOS Settings
to the Station IP address. This setting only changes the IP address in BIOS Setup
interface, and does not notify BMC to change the IP settings.
5.
Repeat step 3 and step 4 (on how to change the setting for Station IP address) to
change the settings for Subnet mask, Station MAC address and Router IP address.
To configure the BMC Dynamic network parameters:
1.
Set the Get BMC Sharelink Parameters or Get BMC Dedicated Parameters to [Manual].
2.
Set the Configuration Address Source to [DynamiBmcDhcp]. The “Set Dynamic BMC IP
Address Source Success! .......” message appears. Press Enter to continue.
