2
Safety Instructions
8.
Please be sure not to scatter food or liquid in the system or on other components,
and do not use the product in humid or dusty environments.
9.
Using an incompatible battery may cause explosion. When battery replacement is
required, please consult the manufacturer first, and choose batteries of the same
or equivalent type. Do not disassemble, crush, puncture the batteries or make the
external connection point short circuit, and do not expose them in the environment
over 60°C. Never throw batteries into fire or water. Please do not attempt to open
or repair the batteries. Dispose of used batteries according to instructions. For
battery recycling, please contact the local waste recycling center.
10.
Before installing equipment into the rack, please install all front and side stabilizers
on the independent rack first. Please install the front stabilizers first, if connecting
with other racks. Please install stabilizers before installing equipment into the rack.
Failure to install the corresponding stabilizers before installing equipment into the
rack may cause the cabinet to tip over, possibly resulting to severe injury. After
installing the equipment and other components into the rack, only one component
can be pulled out from the rack through its sliding part at one time. Pulling out
several components at the same time may cause the rack to turn over, resulting to
serious personal injury.
11.
A minimum of two people are required to safely move a rack. The racks are
extremely awkward and heavy, moving them without adequate, trained personnel
could result in severe injury or death.
12.
It is prohibited to directly short-circuit the copper busbar. Please do not touch the
copper busbar when the rack is powered on.
13.
This is Class A product, and may cause radio interference. In such case, users may
need to take necessary measures to mitigate the interference.
14.
The equipment is intended for installation in a Restricted Access Location.
NOTE:
The following considerations may help avoid the occurrence of problems that
could damage the components or cause data loss, etc.
1.
In the event
of
the following, please unplug the power line plug from the power
socket and contact Inspur’s customer service department:
1)
The power cables, extension cables or power plugs are damaged.
2)
The products get so wet.
3)
The products have fallen or have been damaged.
4)
Other objects have fallen into the products.
5)
The products do not or are unable to function normally even when attempting
to operate according to the instructions.
2.
If the system becomes wet or damp, please follow these steps:
