Inspur NF5486M5, User Manual

Page: 46 / 142

40
Key Instruction Table
Key Description
↑↓ Used to move cursor in different menus or to change values of menu options
TAB To select the next menu option
Enter To select a menu
Esc To exit menu or return to previous menu from sub-menu
Menu Instruction Table
Create RAID Volume To create an RAID volume
Delete RAID Volume To delete an existed RAID volume
Reset Disks to Non-RAID To reset disks in RAID volume, and to restore them to non-RAID status
Mask Disk as Spare
To mask the disks as spare disks. The data will be cleared, and these disks can
not be selected during RAID setting. It can be restored through the Reset Disks
to Non-RAID menu.
Exit To exit SATA Host RAID configuration interface
3.2 Create RAID Volume menu. After entering SATA RAID configuration interface, you could
use up and down arrow keys to select this menu, and then press Enter to enter the Create
RAID Volume menu, or directly input the number before the menu to enter the Create RAID
Volume menu. For other menu operations that are similar, it will not be repeated here.
A Create RAID Volume instance is shown in the following figure: