Inspur NF5486M5, User Manual

Page: 44 / 142

38
Create RAID Menu Instruction Table
Interface Parameters Function Description
Name
Please enter a volume name less than 16 characters without containing any special
characters.
RAID Level
Please select the RAID volume level. If no volume has been created at present, there are
four volume levels of RAID0 (Stripe), RAID1 (Mirror), RAID10 (RAID0+1) and RAID5 (Parity)
for selection. Please select the volume level according to actual requirements.
RAID0: This RAID volume is allowed to be made on 2 or above disks.
RAID1: This RAID volume is allowed to be made on 2 disks.
RAID10: This RAID volume is allowed to be made on 4 disks, which is only available
when disk quantity is 4 or above.
RAID5 (Parity): This RAID volume is allowed to be made on 3 or above disks.
Select Disks
Select disks to make RAID volume, press Enter, select X, and then press Enter to
return to Create RAID Volume interface.
Strip Size Please select the strip size, only RAID0 and RAID5 volumes could enable this option.
Capacity
Set the volume capacity, and the maximum capacity is shown in the Help information
on the right side.
Create Volume After finishing the above settings, select this option to create RAID volume.
2.3 Delete RAID volume. Select a created RAID Volume, press Enter. Select “Delete”, there
will be a prompt. To delete the volume, select “Yes” and press Enter; to cancel the deletion,
select “No” and press Enter.