Inspur NF5486M5, User Manual

Page: 3 / 142

Abstract
This manual contains technical information such as specifications, hardware operations,
software configuration, fault diagnosis, etc., that are relevant to the maintenance and
operation of this server.
It is recommended that server installation, configuration and maintenance is performed by
experienced technicians only.
Target Audience
This manual is intended for:
l
Technical support engineers
l
Product maintenance engineers
l
Technicians
Warnings:
This manual introduces the NF5486M5 server’s technical features, system installation
and setup, which will help the user to understand how best to utilize the server and all its
functionalities.
1. For your safety, please do not disassemble the server’s components arbitrarily. Please do
not extend configuration or connect other peripheral devices arbitrarily. If needed, please
contact Inspur for our support and guidance.
2. Before disassembling the server’s components, please be sure to disconnect all the power
cords connected to the server.
3. BIOS and BMC setup is a significant factor in correctly configuring your server. If there
are no special requirements, it is suggested to use the Default Values and not alter the
parameter settings arbitrarily.
4. Please install the product-compatible operating system and use the driver provided by
Inspur. If you use an incompatible operating system or non-Inspur driver, it may cause
compatibility issues and affect the normal use of the product, Inspur will not assume any
responsibility or liability.
Inspur is not responsible for any damages, including loss of profits, loss of information,
interruption of business, personal injury, and/or any damage or consequential damage
without limitation, incurred before, during, or after the use of our products.