13
Icon
LED
Description
Hot_Plug
OCP 3.0 Card
Hot-Plug Button
and LED
Button:
‐
Enables the hot-swap function of the
OCP 3.0 Card
LED:
‐
Solid blue = OCP card is powered on
‐
Flashing blue = OCP card power
being removed or connected
‐
Off = OCP NIC is not powered on
N/A
Data Transmit
Rate LED of BMC
Management
Network Port
Off = No network connection
Solid green = Normal network connection
(1000 Mbps)
Solid orange = Normal network
connection (100 Mbps/10 Mbps)
N/A
Connection
Status LED of
BMC
Management
Network Port
Off = No network connection
Solid green = Normal network connection
Flashing green = Data transmission in
progress
N/A
PSU LED
Off = No AC power to PSU
Flashing green (1 Hz) = PSU operating in
standby state with normal AC input.
Solid green = Normal input and output
Flashing amber (1 Hz) = PSU warning
event where the PSU continues to operate
(possible causes: PSU overtemperature,
PSU output overcurrent, excessively high
or low fan speed)
Solid amber = PSU critical event causing a
shutdown (possible causes: PSU
overtemperature protection, PSU output
overcurrent or short circuit, output
overvoltage, short circuit protection,
component (not all components) failure)
