49
Figure 8-3 Wearing an ESD Wrist Strap
Use tools correctly to avoid personal injury.
When moving or lifting equipment above shoulder height, use lifting devices
and other tools as necessary to avoid personal injury or equipment damage
due to equipment slippage.
The power sources of the server carry a high voltage. Direct contact or indirect
contact through damp objects with the high-voltage power source is fatal.
To ensure personal safety, ground the server before connecting power.
When using ladders, always have someone hold and guard the bottom of the
ladders. In order to prevent injury, never use a ladder alone.
When connecting, testing or replacing optical fiber cable, avoid looking into
the optical port without eye protection in order to prevent eye damage from
laser light.
8.1.3
Equipment Safety
To ensure personal safety and prevent equipment damage, use only the power
cords and cables that come with the server. Do not use them with any other
equipment.
Before touching the equipment, put on ESD clothing and ESD gloves to prevent
static electricity from damaging the equipment.
When moving the server, hold the bottom of the server. Do not hold the
handles of any module installed in the server, such as PSUs, fan modules,
drive modules, or motherboard. Handle the equipment with care at all times.
Use tools correctly to avoid damage to the equipment.
Connect the power cords of active and standby PSUs to different PDUs to
ensure high system reliability.
