Inspur NF5468A5 Manual Download Page 42

Page: 42 / 74

Product Specifications

6.1

Technical Specifications

Table 6-1 Technical Specifications

Item

Description

Form Factor

4U rack server

Processor



2 AMD Rome or Milan processors



Up to 64 cores



Max base frequency at 3.1 GHz



Up to 256 MB of L3 cache



Up to 3 xGMI links at up to 18 GT/s



TDP up to 280 W

The above information is for reference only, see

7.2 Hardware Compatibility

for

details.

Memory



16 × DIMM slot per processor, 32 in total



8 × memory channel per processor, 16 in total



Supports DDR4 RDIMM/LRDIMM (3200 MT/s, 1 DPC)

The above information is for reference only, see

7.2 Hardware Compatibility

for

details.

Storage



Supports multiple drive configurations, see

5.5.1 Drive

Configuration

for details.

Hot-swap SAS/SATA/NVMe drives.

Front: 24 × 2.5-inch drive or 12 × 3.5-inch drive, where 8
drive bays support U.2 NVMe SSDs (A technical review is
required if more than 4 NVMe SSDs are installed);

Internal: 2 × M.2 SATA SSD.



Supports multiple models of RAID controller cards.

•

The M.2 SSD is only used as the boot device for installing the OS.

Summary of Contents for NF5468A5











































































Search results

Summary of Contents for NF5468A5

Reviews:

Related manuals for NF5468A5

Brands by name

Popular brands

Inspur NF5468A5, Manual

Search results

Summary of Contents for NF5468A5

Reviews:

Related manuals for NF5468A5

Brands by name

Popular brands