background image

Special tips: 

Before  installation  and  operation,  please  read  this  operation  manual  carefully  and  save  this  manual  for  future 
reference. 

WARRANTY  

We make sure that this item is made of high-quality materials. 

In normal use, we will take charge of maintenance if any problem occurs. 

If the item you purchased meets problems as follows, the manufacturer’s warranty is not effective: 

 

Damage caused by external reasons 

 

Don’t use original manufacturer’s spare parts 

 

Improper handling by yourself 

 

Operate against user manual 

For easy-wear parts, such as belt, we don’t provide maintenance and replacement for normal use. 

This warranty is only valid for home use, but is not suitable for gym or other professional exercise. 

If you want to purchase spare parts, please contact our services and provide this manual. 

TIPS FOR SAFETY 

We  take  much  concern  on  safety  when  we  are  designing  and  producing  this  item.  However,  in  case  of 
emergency,  please  pay  attention  to  following  tips.  We  don’t  assume  responsibility  if  any  accident  caused  by 
improper operation.  

 

According to your body condition, please exercise properly. Overload or improper exercise will damage 

your health.  

 

While running, you should dress properly. Don’t dress too loosely in case your clothes will be entangled 

by the machine .And please wear sport shoes. In order to avoid unnecessary injury, please don’t let your 
children or pets play near the machine.  

 

This  item  is  not  suitable  for  children.  For  patients  or  the  disabled,  please  use  the  machine  under  the 

guides of their doctors or guardians. 

 

Don’t use this machine outdoor, high-humidity condition or in the sun. 

 

Please power off and pull the plug when the machine is not in use. 

 

This machine is for home use, but not suitable for professional exercise or testing and medical purposes. 

 

The displayed heart rate is for reference, not for medical use. 

 

If  power  wire  is  broken,  please  ask  the  manufacturer  or  professional  services  to  replace  it  in  case  of 

danger. 

 

Please check all the parts before use. Make sure that all the screws and nuts are fastened. 

 

Please place the item on the clean, flat and solid floor. Make sure there is nothing sharp, no source of 

water or hot around the machine. 

 

Please stop exercising immediately and consult your doctor or fitness coach if you’re feel giddy, surfeit, 

thorax ache or other symptoms. 

 

Hands shall avoid all running parts. Don’t put your hands or feet under the running belt. 

 

This item is only for one person to use! 

 

Please use original manufacturer’s spare parts and don’t replace them yourself. 

PACKING DETAILS 

Warning:

 

Carefully install the product, avoid making any damage.

 

Summary of Contents for Trodos QST8436





















Reviews: