18
6
E03
on the screen
Big speed fluctuation
If this problem happened when speed is higher
than 8km/h, the machine is overload, running
belt is broken or lack of lubricant.
If the motor has been used for a long time,
replace the motor or replace the PCB.
7
E04
on the screen
Error of the communication line
Check connections of the meter and under
control and make sure they are all well
connected. Otherwise, replace some lines.
8
E05
on the screen
Current overload protection
Check the motor. If it’s OK, restart the machine.
9
E06
on the screen
Error of the motor
Check whether the motor are well connected,
Otherwise, replace the motor or PCB
10
E07
on the screen
Error of communication
Check connections of the meter and under
control and make sure they are all well
connected.
11
E08
on the screen
Overload protection
Make sure the weight of the user is not
overweight. If so, add lubricant to the running
board.
12
E09
on the screen
Overheat protection
Stop the machine and let it cool down. If this
error happens when in normal temperature, then
replace PCB.
13
E10
on the screen
Overvoltage protection
Check input voltage.
14
E11
on the screen
Under voltage protection
Check input voltage.
15
E12
on the screen
Error of incline
Check whether the VR wire of incline motor is
well connected. Then check other connections
of incline motor. If there are lines broken,
replace them.
Note:
If the machine still doesn’t work after taking these solutions, please contact our services as soon as
possible.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure.
Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No.
