background image

19 

513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection Act, as amended, also in 
cases that are not specified by these Warranty rules. 

The  seller  is  SEVEN  SPORT  s.r.o.  with  its  registered  office  in  Borivojova  Street  35/878,  Prague  13000, 
Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section 
C, Insert No. 116888. 

According to valid legal regulations it depends whether the Buyer is the End Customer or not. 

“The Buyer who is the End Costumer” or simply the “End Costumer” is the legal entity that does not conclude 
and execute the Contract in order to run or promote his own trade or business activities. 

“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of 
using  the  Goods  or  services  for  his  own  business  activities.  The  Buyer  conforms  to  the  General  Purchase 
Agreement and business conditions to the extent specified in the Commercial Code. 

These  Conditions  of  Warranty  and  Warranty  Claims  are  an  integral  part  of  every  Purchase  Agreement  made 
between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in 
the Purchase Agreement, in the Amendment to this Contract or in another written agreement. 

Warranty Conditions 

Warranty Period 

The  Seller  provides  the  Buyer  a  24  months  Warranty  for  Goods  Quality,  unless  otherwise  specified  in  the 
Certificate of Warranty, Invoice, Bill of Delivery or other  documents related to the Goods. The legal  warranty 
period provided to the Consumer is not affected. 

By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a certain period 
of  time,  suitable  for  regular  or  contracted  use,  and  that  the  Goods  shall  maintain  its  regular  or  contracted 
features. 

The Warranty does not cover defects resulting from: 

User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, insufficient insertion of 
seat post into frame, insufficient tightening of pedals and cranks 

Improper maintenance 

Mechanical damages 

Regular use (e.g. wearing out of rubber and plastic parts, joints etc.) 

Unavoidable event, natural disaster 

Adjustments made by unqualified person 

Improper  maintenance,  improper  placement,  damages  caused  by  low  or  high  temperature,  water,  inappropriate 
pressure, shocks, intentional changes in design or construction etc. 

Warranty Claim Procedure 

The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the responsibility for 
the  Goods  and  its  damages,  i.e.  immediately  after  its  delivery.  The  Buyer  must  check  the  Goods  so  that  he 
discovers all the defects that can be discovered by such check.

  

When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase and validity 
of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or eventually by the 
documents  without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these 
documents, the Seller has the right to reject the Warranty Claim. 

If  the  Buyer  gives  notice  of  a  defect  that  is  not  covered  by  the  Warranty  (e.g.  in  the  case  that  the  Warranty 
Conditions  were  not  fulfilled  or  in  the  case  of  reporting  the  defect  by  mistake  etc.),  the  Seller  is  eligible  to 
require  a  compensation  for  all  the  costs  arising  from  the  repair.  The  cost  shall  be  calculated  according  to  the 
valid price list of services and transport costs. 

If  the  Seller  finds  out  (by  testing)  that  the  product  is  not  damaged,  the  Warranty  Claim  is  not  accepted.  The 
Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim. 

In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, 
the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for 

Summary of Contents for Trodos QST8436





















Reviews: