![background image](http://html.mh-extra.com/html/insportline/incondi-t70i/incondi-t70i_user-manual_2069348026.webp)
26
4.
The display shows E03 after switch on - no sensor signal.
A. If the motor starts working for about 5 - 8 seconds and then the monitor displays E03. It stands
for no speed signal. Please check whether the speed sensor is connected well or not. In
addition, please check whether the sensor is broken or not.
B. The sensor wire on the PCB board is broken, please replace the PCB board.
5.
The display shows E04 after switch on.
A. Please check whether the signal wire of the incline motor is ok or not, please pull of the
connector and insert it again.
B. Please check the connection of the AC wire of the incline motor is correct or not. Please check
according to drawing.
C. Please check whether the wire of the incline motor is broken or not, if it is broken please
replace the wire or the incline motor.
D. Replace the PCB board
E. After checking all of the PCB, please press the LEARNING key to learn it again.
6.
The display shows E05 after switch on - overload protection.
A. The load is too big, please reset.
B. Maybe some part is jammed which makes the motor too heavy, so the machine cannot work.
Please adjust the running belt or lubricate some oil.
C. Check the motor whether there is any special smell or overload currency sound. If so, please
replace the motor.
D. Check whether the PCB board is burnt or not, please replace the PCB board.
E. The IGBT on the PCB board is short circuited, please check the IGBT by multi-meter. Please
replace the PCB board.
LUBRICATION REMIND FUNCTION
1. This machine has lubrication remind function. After every total running distance of 300 km,
system will remind you to oil the treadmill.
2. Please use treadmill oil only.