25
Icon Description
ZY-VIDEO-3
160.06MB.
The green words stand for the name of playing video and the size of
the file.
The white words stand for the rest of the videos and the size of the
file.
01:56
05:00
The data Stands for the progress of the playing video.
The data stands for the total time of the video.
The icon stands for the progress of the playing video.
Safety key function
Pull off the safety key in any case and the machine will stop working immediately. Meanwhile all
windows will show --- and the beeper chimes three times. Before you put the safety key on you cannot
operate the machine any more except switch off the machine.
Energy saving mode
If there is not any operation in 10 munities, the machine will enter into energy saving mode and the
display will shut down. You can wake the system by pressing any key.
Power off
You can switch off at any time if you w
ant to stop training and it won’t do any damage to the machine.
Caution
1.
Please check the power and if the safety key is well put or not before training.
2.
If any accident happens during exercise, please pull off the safety key immediately.
3.
If there is something wrong with the machine, please contact the retailer as soon as possible.
It’s
not allowed to repair the equipment by a layperson.
Simple Malfunction and Solution
1.
There is no signal when power is on.
A. First check whether the over load protector is open or not, if opened, please close it.
B. Make sure the wire of the switch, over load protector and driver are connected well.
C. Make sure the wire between the monitor and driver is connected well.
2.
The display shows E01 after switch on.
A. There something wrong with the signal cable. Please check if each cable between display and
the driver is well connected or not.
B. There is something wrong with the display component part, please replace the display.
C. Replace the transformer.
3.
The display shows E02 after switch on.
A. Check if the motor cable is well connected or not, if not please reconnect the motor cable. If it
does not work, please replace the motor.
B. Check the controller whether there is any special smell. If so, please replace the controller.
C. Check whether the input voltage is correct or not. Please use the right input voltage.
