![background image](http://html1.mh-extra.com/html/insportline/in-1842/in-1842_user-manual_2068930017.webp)
17
INSTALLING THE FRONT REFLECTOR
NOTE:
After assembling the bike, check the placement of
the reflectors. The reflectors should always be vertical.
Installing reflector onto the handlebars:
Attach the holder with the white reflector so that the
reflector faces straight ahead (A).
After setting the reflector’s position, affix the holder with a
fixing bolt
– tighten with screwdriver.
INSTALLING THE REAR REFLECTOR
1. Loosen the screws on the rear reflector holder
and set the reflector into the correct position.
2. The rear reflector must be vertical and facing
backwards.
3. There should be at least 7.5 cm gap between the
reflector and the edge of the saddle.
Maintenance
WARNING!
For your safety, do not use the bike if the reflectors are missing, damaged or not properly
set. Make sure both rear and front reflectors are vertical. Be careful not to cover the reflectors with
clothes or other materials. Keep the reflectors clean with the help of a soap and a wet cloth.