![background image](http://html1.mh-extra.com/html/insportline/in-1842/in-1842_user-manual_2068930014.webp)
14
Tools needed for assembly:
Philips screw driver: 4 mm, 5 mm
Allen wrench: 6 mm, 8 mm
Screw-wrench or a nut wrench: 9 mm,
10 mm, 14 mm, 15 mm
Wrench and socket wrench
Pliers to cut wire
You’ll avoid injuries only if the bike is correctly assembled and set. If you purchased an already set bike,
it is recommended to check it according to the manual before using it. Make sure that the bike was
supplied with all the necessary assembly and adjustment instructions.
ASSEMBLY
Taking into account all the model varieties, this manual is generalized. Should you have a problem with
the assembly, contact the customer service.
Place the front wheel in the center of the
fork and screw the nuts to the wheel
with the supplied nut wrench.
Screw the bolts on the seat holder with
the supplied Allen wrench.
Assemble the upper part of the headset,
Slide the front mudguard onto the fork
tube and then put the disassembled part
of the headset back. Tighten with the
supplied nut wrench.