![background image](http://html1.mh-extra.com/html/insportline/in-1842/in-1842_user-manual_2068930018.webp)
18
PEDAL ASSEMBLY
The pedals are marked with L or R (left/right).
1. Screw the right pedal (R) clockwise to the right-
side crank (the side with the chain).
2. Screw the left pedal (L) to the left-side crank.
NOTE:
Screw the pedals manually first, so that you do not
damage the thread. After tightening it with a wrench, make
sure it is threaded fully. If the wrench is too thick, it’s range
may be limited.
SADDLE ASSEMBLY
Insert the seat post onto the bike frame
– the bent
end upwards.
NOTE:
Insert the seat post at least up to the minimum
insertion point. If the point is not marked, insert at least
7.5 cm of the seat post.
Tighten the seat post clamp
– recommended torque
= 13.6 N m.
Loosen the saddle clamp and attach the saddle to
the seat post.
Tighten the saddle clamp
– recommended torque =
17 N m.
SADDLE HEIGHT
1. Step on the pedal so that it is in its lowest position.
2. Put your heel onto the pedal, so that your foot is
parallel to the ground.
3. Adjust the seat so that you can reach the ground with
the toes of your other foot. The saddle should be
parallel to the ground and aligned with the frame.
4. Tighten the seat post clamp
– recommended torque
= 17 N m.
NOTE:
Insert the seat post at least up to the minimal
insertion point.