4. Place the mount on the aerobars by placing each of the mounting
clamps onto the extensions. Ensure the clamp is secure and
completely touching the extensions.
3. Loosen the mounting clamp screws using the 3mm Hex Wrench.
5. Center the mounting plate and hand tighten each of
the screws.
6. Secure the Velcro straps by routing them through the clamps.
Pull the straps as tight as possible and attach them in place.
7. Tighten both mounting clamp screws to 35 in lbs (4.0 Nm).
TOOLS REQUIRED
MOUNTING TO BIKE
3mm Hex Wrench
Torque Wrench up to 35 in lbs (4.0 Nm)
HARDWARE
CAGE MOUNTING
M5 x 12mm
Socket Head
M5 x 14mm
Socket Head
M5 Flat Washer
(x2)
M5 Nylon Insert
Lock Nut (x2)
M5 Nylon Washer
M5 x 12mm Button Head
Flange Screw (x2)
MOUNTING CLAMP
M4 x 10mm
Flat Head Screw (x2)
M3 x 6mm
Flat Head Screw (x2)
Screw Post / Screw
Spring
2. Remove the Torpedo Bottle from the cage by holding the mount and twisting the
bottle and pulling out.
M5 x 25mm
Flat Head Screw
IMPORTANT:
PLEASE COMPLETELY UNDERSTAND ALL USER INSTRUCTIONS AND SAFETY INFORMATION BEFORE USING THIS PRODUCT. AS WITH ANY HIGH TECH PRODUCT YOU WILL NEED TO
ROUTINELY CHECK FOR LOOSE HARDWARE, CRACKS OR OTHER DAMAGE AND REPLACE ITEMS AS NECESSARY. DO NOT USE PRODUCT IF ANY OF THESE CONDITIONS EXIST.
COMPUTER MOUNT
TORPEDO VERSA 500
TORPEDO VERSA 500
1. Rotate the top of the computer mount all the way forward to allow room for the bottle.
M4 x 20mm
Flat Head Screw
BOTTLE
Dolphin Breather Valve
