16
•
With setting the target value, calories will count down from your target calorie to 0, and as 0 is
achieved calorie alarm.
•
Range 0.0~9999 Cals
•
Calorie count on the display only serves as a general guideline. For detail calorie consumption
for each individual please consult a physician or a nutritionist.
ODO
•
Accumulates total workout distance. This data can be reset to zero when batteries are
replaced.
PULSE
With pulse signal into for 6 seconds, the current pulse will display.
•
W/O pulse signal into for 6 seconds, it displays “P”
•
Pulse alarm when over preset target pulse.
•
Range 0-40~230 BPM
BUTTON FUNCTION
RESET
•
In setting condition, press RESET key once to reset the current function figures.
•
Press RESET key and hold for 2 seconds to reset all function figures, and have Bi sound for
prompt at the same time.
SET
•
Each adding by pressing once, press and hold the button to increase the value faster
•
TMR setting range: 0:00~99:00 (Each increment is 1:00)
•
CAL setting range: 0~9990 (Each increment is 10)
•
DST setting range: 0.0~999.0 (Each increment is 1.0) KM
MODE
•
Choose each function by pressing MODE key. In SCAN mode, press MODE key can lock the
current function.
•
Press MODE key and hold for 2 seconds to reset all function figures.
POWER ON/OFF
Power on:
LCD will display all segments with Bi sound as Drawing A.
Power off:
Without any signal been transmitted into the monitor for 4 minutes, and the monitor enter
to SLEEP.
OPERATION
1. When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD will
display all segments with Bi sound for one second and enter to SCAN mode as Drawing B.
2. With any signal been transmitted into the monitor, the value of TMR, DST, and CAL will start
to count up as Drawing C.
3. Without any signal been transmitted into the monitor for 4 minutes, the monitor will enter to
SLEEP mode.
TROUBLE SHOOTING
•
When the display shows Drawing D, it means the batteries need to be changed.
