11
STEP 5:
a) Place the end of the 8-stage Tension Control Cable (15) into the spring hook of the Lower
Tension Cable (32).
b) Pull the 8-stage Tension Control Cable upwards against the spring pressure and push it into
the gap on the metal bracket of the Lower Tension Cable as shown.
c) Complete the fitting as shown and if necessary, close the open section of the metal bracket
slightly with a pair of pliers as this will help to retain the cables.
d) Connect the lower part of the Upper Link Wire (33) to the Lower Sensor Wire (34) ensuring a
tight connection. Feed the Upper Link Wire (33) out through the top of the Handlebar Upright
(2).
e) Carefully lower the Handlebar Upright (2) onto the Main Frame (3), loosely fit 4 x M8 x 20mm
Allen Bolts (39), 4 x M8 Spring Washers (42) and 4 x M8 Curved Washers (41).
f) Fit the Bottle Cage (46) with 2 x Self-tapping Screws 4.2 x 20mm (45).